Technical equipment
Beside laboratories for
chemical and physical investigations the INC possesses a pilot plant
station and special labs for working with hazardous gases and
materials. At INC there are equipment and plants available for:
The INC has the possibiliy to use infrastructure of the
University of Leipzig with a lot of further special know how, tools and
equipment.
Detailed information on request.
Adsorption
- Magnetic suspension balance for gravimetric
determination of adsorption behaviour of fluids on adsorbens
(porous materials) even in corrosive media
- Microbalance for
gravimetric determination of adsorption behaviour of non-corrosive gases on porous materials
- Volume-gravimetric apparatus for
determination of adsorption behaviour of
pure gases and binary mixtures on porous materials
- Volume-chromatographic apparatus for determination of adsorption
behaviour of pure gases and mixtures on porous
materials
- Apparatus for determination of breaktrough curves
up to 60
bar
- Apparatus for determination of breaktrough curves of solvents
- Pilot plant for adsorption and solvent recovery
- Volumetric
apparatus for determination of textural
properties of
porous materials (characterization at 77 K, 87 K, and 273 K with N2,
Ar or CO2; BelSorp max)
- Volumetric
apparatus for determination of adsorption isotherms of
non-corrosive gases
at low pressure (up to 1 bar; BelSorp max)
- Volumetric
apparatus for determination of adsorption isotherms of
solvents (BelSorp max)
Chemical
analysis
- Gas-phase chromatographs with different dosing systems and
detctors
- High performance liquid chromatograph with diode array detector
- Ion chromatograph
- UV/VIS spectrometer
- ATR-FTIR spectrometer
- TN/TOC/TIC/DOC/COD- and AOX-analytics
- Apparatus for carbon analysis on metal surfaces
- Mobile gas-phase chromatograph with FID
- Thermal gravimetric analysis
High pressure
autoclaves
- 100 ml - autoclav (2000 bar, 600 °C)
- 200 ml - autoklav (1000 bar, 450 °C)
- 300 ml - autoklav (500 bar, 200 °C)
- 500 ml - autoklav (1000 bar, 450 °C)
Microwave
systems
Microwave systems and apparatuses for different
temperature-controlled and/or pressure-controlled investigations:
- Microwave systems for processes under normal pressure up to 400
°C
- Autoclaves (Teflon) for processes and decompositions up to 200
°C and 30 bar
- Continuously working system for chemical reactions and waste
water treatment up to 10 bar and 200 °C
- Pilot
plant
for processes with supercritical carbon dioxide (autoclave with
microwave) up to 120 °C and 200 bar
Ultrasound
systems
- Flow-through sonotrode UW 2070 (20 kHz, Bandelin)
- Planar sonotrode 50 mm diameter (850 kHz, Meinhardt)
- Planar sonotrode 10 mm diameter (1600 kHz, Meinhardt)
- Sonotrode UP 200s with reactor (20 kHz, Dr. Hielscher
GmbH)
- Flow-through reactor with UIP 250 (20 kHz, Dr. Hielscher GmbH)
- Ultrasound system UIP 500 (20 kHz, Dr. Hielscher GmbH)
- Push-pull-Schwinger MW 600 GPI (25 kHz, Martin Walter
Ultraschalltechnik GmbH)
- Biosep APS 990
Additional
equipment
- Pilot plant for gas scrubbing
- Apparatuses for different extraction processes
- Pilot plant for supercritical fluid extraktion
- Dynamic reactors for high temperature processes
- Microbalances for gravimetric investigations under high
temperatures
